image
The Ultimate Drawing Course Beginner to Advanced...
$179
$79
image
User Experience Design Essentials - Adobe XD UI UX...
$179
$79
Total:
$659

Description

Quality Engineering - from Zero to Hero. 
The Most Comprehensive Quality Engineering Course: This course has 38 hours of videos covering the complete Body of Knowledge.
This course
fully aligns with the Certified Quality Engineer Body of Knowledge
.
Additional 23 videos are added in July 2022 to cover the updated CQE BoK.
Easily pass any Certified Quality Engineer (CQE) examination and get certified. This course covers all you need to know as a Quality Engineer - whether you want to take a Quality Engineer certification exam or be a successful Quality Engineer in your organization.   
________________________________________
Why this course?
Learn from an experienced instructor having 35 years of "practical experience" in implementing Quality Management and Continuous Performance Improvement.
5,700+ satisfied students.
This course is fully aligned with the Certified Quality Engineer (CQE) Body of Knowledge.
This course covers all you need to know as a Quality Engineer and to pass your CQE certification exam. 
Quiz questions in each section. 175+ quiz questions are available.
Are you appearing in the Certified Quality Engineer (CQE) exam?
You know the basics, but when it comes to statistics, you get confused.
You find concepts such as central limit theorem, probability distributions, hypothesis testing, and design of experiments are too complex to understand.
You wish someone could explain these to you without using complex terminology in plain and simple language.
Does this sound familiar? Let me help you understand these concepts and many more in plain and simple terms at such an affordable price.
________________________________________
What are other students saying about this course?
★★★★★ 
I had my
CQE exam
yesterday, and
passed on my first attempt
! This content was spot on and very helpful for taking the exam. Thanks a bunch!
(5 stars by
David Gonzalez
)
★★★★★ 
Yes, it was a great match. Just wished I found it sooner.
(5 stars by
Amos Battoo
)
★★★★★ 
I went through this course and I must confess it exceeded my expectations, as
I passed my CQE exams at a sitting
. Sandeep not only dissected the CQE handbook for easy understanding, but more so provided a well grounded knowledge on the modules. I can never be more grateful for his insight. If you intend to sit for CQE exam, just go through this course and some exam questions you can find online. You will be fine. Thank you Sandeep and Udemy for an amazing work.
(5 stars by
Ndubuisi N Ogbuezi
)
★★★★★ 
I have
cleared ASQ CQE in my 1st attempt.
This course helped me to understand the basic concepts through Mr.Sandeep's simple examples.
(5 stars by
Sarath K Jolly
)
★★★★★ 
Best affordable online lectures for passing CQE exam. Ton of thanks to Sandeep.
I passed my CQE exam
by reviewing this course multiple times. I also studied quality CQE handbook and ASQ CQE study guide.
(5 stars by
Sudhakar Thamodharan
)
★★★★★ 
Just took my CQE exam and this class is definitely the reason that
I passed
first try.
(5 stars by
Hilary High
)
★★★★★ 
I really liked the way,
complex topics are simplified
by Sandeep Sir.
(5 stars by
Babeeta Nautiyal
)
★★★★★ 
This preparation course helped me to clear my ASQ CQE exam.
(5 stars by
Vivek S A
)
★★★★★ 
I have
passed the CQE successfully
. This course is more than helpful to have a crack at it.
(5 stars by
Manohar Thummapudi
)
★★★★★ 
I learned a lot from this course and it helped me to
pass my CQE exam
.
(5 stars by
Jose Cortes
)
★★★★★ 
This course explains Body of knowledge in a very clear and comprehensive manner.
I have cleared my CQE exam
in the first attempt itself.
(5 stars by
Dupinderjit Singh
)
★★★★★ 
It really easy to listen and watch I hope I can get through the
CQE exams very easily
INSHALLAH.
(5 stars by
Adeel Siddiqui
)
★★★★★ 
Excellent course, it has helped me a lot for
preparing for the CQE exam
, totally recommended.
(5 stars by
Miroslav Vulinovic
)
★★★★★ 
I have not taken the CQE test yet but with my notes from this training, I am hoping it would be enough to pass this exam.
(5 stars by
Priscilla Acquah
)
________________________________________
What is covered in this course?
Master the Quality Engineering advanced concepts at your own pace and add value to your organization by improving existing processes.   
Areas covered in this course:   
1. Management & Leadership
2. The Quality System
3. Product & Process Design
4. Product & Process Control
5. Continuous Improvement
6. Quantitative Methods & Tools
7. Risk Management
Quiz questions in each section. 175+ quiz questions are available.
Key Features:
   
Short and easy-to-understand videos covering the complete Body of Knowledge
Downloadable lecture slides after each section
Quiz questions after each section to test your understanding.
Ask your questions in the Q&A section 
Satisfaction guaranteed - 30 days money-back policy - no questions asked
Certificate of Completion provided
What are you waiting for?
This course comes with Udemy's 30 days money-back guarantee. If you are not satisfied with the course, get your money back.
I hope to see you in the course.
________________________________________
Note: We are not a representative of ASQ®, IASSC® or any other certification organization.
ASQ® is the registered trademark of the American Society for Quality.
IASSC® is the registered trademark of the International Association for Six Sigma Certification.
We are an independent training provider. We are neither associated nor affiliated with the certification organization(s) mentioned in our courses. The name and title of the certification exam mentioned in this course are the trademarks of the respective certification organization. We mention these names and/or the relevant terminologies only for describing the relevant exam processes and knowledge (i.e. Fair Use).
Disclaimer:
The tagline "Successfully pass the exam on the first attempt" represents an aspirational goal based on the success of past students and is not a guarantee or warranty of passing the exam. Professional certification exams demand rigorous study, understanding, and application of complex concepts. While our courses are designed to aid in clarifying these concepts and have helped many students, success in the exam ultimately depends on the individual's dedication and effort. Enrolling in our course is a step towards preparing for your exam, but it does not warrant exam success without the necessary hard work and comprehensive preparation.
Who this course is for:
Quality Engineers preparing for the Quality Engineer Certification exam
This course is fully aligned with the Certified Quality Engineer Body of Knowledge provided by most internationally recognized certification bodies.

What you'll learn

Transform your CQE dreams into reality with our proven prep course designed to help you become a Certified Quality Engineer.

Gain confidence in using key quality concepts such as Reliability, Acceptance Sampling, Measurement System Analysis, Control Charts, and Design of Experiments.

Master descriptive and inferential statistics including Hypothesis Testing, Probability Distributions, Z Test, t Test, Chi-Square Test, and ANOVA.

This course is fully aligned with the Certified Quality Engineer (CQE) Body of Knowledge as provided by internationally recognized certification bodies.

Equip yourself with the knowledge and skills needed to confidently pass the CQE exam and excel in your quality engineering career.

Learn how to apply quality engineering principles in real-world scenarios to improve processes and products effectively.

Increase your job prospects and career growth opportunities with a recognized CQE certification that sets you apart.

Gain a thorough understanding of advanced quality engineering techniques and their practical applications in the industry.

Show your commitment to quality and excellence by achieving CQE certification and becoming a key player in your organization’s quality initiatives.

Requirements

  • You will need a copy of Adobe XD 2019 or above. A free trial can be downloaded from Adobe.
  • No previous design experience is needed.
  • No previous Adobe XD skills are needed.

Course Content

27 sections • 95 lectures
Expand All Sections
1-**** Section I - Management and Leadership (18 Questions) ****
62
1.1-Management and Leadership
1.2-Quality Gurus Inc Certificate, Digital Badge, PMI PDUs, SHRM PDCs (Optional)
1.3-1A-1 History of Quality
1.4-1A-1 Quality Gurus
1.5-1A-1 Quality Guru - Edwards Deming
1.6-1A-1 Deming's 14 Points of Leadership - Part 1
1.7-1A-1 Deming's 14 Points of Leadership - Part 2
1.8-1A-1 Deming's 14 Points of Leadership - Part 3
1.9-1A-1 Deming's 14 Points of Leadership - Part 4
1.10-1A-1 Deming's 14 Points of Leadership - Part 5
1.11-1A-1 Quality Guru - Joseph Juran
1.12-1A-1 Juran's 10 Points of Improvement
1.13-1A-1 Juran's Trilogy
1.14-1A-1 Quality Guru - Philip Crosby
1.15-1A-1 Crosby's Four Absolutes of Quality
1.16-1A-2 Continuous Improvement Tools - Introduction
1.17-1A-2 Continuous Improvement Tools - Lean
1.18-1A-2 Continuous Improvement Tools - Six Sigma
1.19-1A-2 Continuous Improvement Tools - Theory of Constraints (TOC)
1.20-1A-2 Continuous Improvement Tools - SPC
1.21-1A-2 Continuous Improvement Tools - TQM
1.22-ASQ CQE 2022 Bok Updates - 1A
1.23-1B-1 Strategic Planning
1.24-1B-2 QMS Deployment Techniques
1.25-1B-2a Benchmarking - Part 1
1.26-1B-2a Benchmarking - Part 2
1.27-1B-2a Benchmarking - Part 3
1.28-1B-2b Stakeholder Analysis
1.29-1B-2c Performance Measures - Balanced Score Card
1.30-1B-2c Performance Measures - Leading vs Lagging Indicators
1.31-1B-2d Project Management - Gantt Chart - Part 1
1.32-1B-2d Project Management - Gantt Chart - Part 2
1.33-1B-3 Quality Information System(QIS)
1.34-ASQ CQE 2022 Updates - 1B - Cost Benefit Analysis
1.35-ASQ CQE 2022 Updates - 1B - RACI
1.36-1C ASQ Code of Ethics for Professional Conduct
1.37-ASQ CQE 2022 Updates - 1C to 1I - No Change
1.38-1D Leadership Principal and Techniques - Types of Teams
1.39-1D Leadership Principal and Techniques - Tuckman's Model
1.40-1E-1Team Roles and Responsibilities
1.41-1E-2 Facilitation Tools - Introduction
1.42-1E-2 Facilitation Tools - Brainstorming
1.43-1E-2 Facilitation Tools - Nominal Group Technique NGT
1.44-1E-2 Facilitation Tools - Multivoting
1.45-1E-2 Facilitation Tools - Conflict Resolution
1.46-1E-2 Facilitation Tools - Force Field Analysis
1.47-1F Communication Skills
1.48-1G Customer Relations
1.49-1G Quality Function Deployment
1.50-1G Customer Satisfaction
1.51-1H Supplier Management Techniques - Introduction
1.52-1H-1Techniques - Supplier Lifecycle Management
1.53-1H-1 Supplier Lifecycle Management - Four Stages
1.54-1H1 Supplier Selection - Overview
1.55-1H1 Supplier Selection Process
1.56-1H-2 Supplier Monitoring and Improvement
1.57-1H-3 Supplier Risk - Introduction
1.58-1H-3 Risk Management Steps
1.59-1H-3 Risk Management Strategies
1.60-1I Barriers to Quality Improvement
1.61-Section 1 Quiz - Management and Leadership
1.62-Section I - Download Slides
2-**** Section II - The Quality System (16 Questions) ****
28
2.1-2A-1 Basic elements
2.2-2A-2 Design
2.3-ASQ CQE 2022 Updates - 2A to 2F - No Change
2.4-2B-1 Document components
2.5-2B-2 Document control
2.6-2C-1 Quality Standards and Other Guidelines
2.7-2C-2 ISO 9000 Series of Standards
2.8-2C-3 ISO 9001 Revision History
2.9-2C-4 ISO 9001:2015 Reasons Behind the Revision
2.10-2C-5 ISO 9001:2015 Key Changes
2.11-2C-6 ISO 9001 Clauses Explained
2.12-2C-7 Quality Awards - MBNQA
2.13-2D1-1 Types of audits Product Process System
2.14-2D1-2 Types of audits First Second and Third Party
2.15-2D2-1 Roles and responsibilities in audits
2.16-2D2-2 Additional Roles and responsibilities in audits
2.17-2D-3 Audit planning and implementation
2.18-2D-4 Audit reporting and follow- up
2.19-2E-1 Cost of Quality (COQ) - Introduction
2.20-2E-2 Cost of Quality Classification
2.21-2E-3 Cost of Quality Why & Optimum Costs
2.22-2E-4 Cost of Quality Taguchi Loss Function
2.23-2E-5 Cost of Quality Example of Taguchi Loss Function
2.24-2E-6 Taguchi Loss Function three models
2.25-2F-1 Quality Training ADDIE Model
2.26-2F-2 Quality Training Kirkpatrick Model
2.27-Section II Quiz - The Quality System
2.28-Section II - Download Slides
3-**** Section III Product, Process, and Service Design (23 questions) ****
70
3.1-3A Classification of Quality Characteristics
3.2-3A Service Quality Characteristics
3.3-ASQ CQE 2022 Updates - 3A - No Change
3.4-3B-1 Design Inputs - Introduction
3.5-3B-1 Design Input Tools
3.6-3B-1 Robust Design - Introduction
3.7-3B-1 Robust Design - Control and Noise Factors
3.8-3B-1 Robust Design - Type of Noise Factors
3.9-3B-1 Robust Design - Ways to Reduce the Effect of Noise - Part 1
3.10-3B-1 Robust Design - Ways to Reduce the Effect of Noise - Part 2
3.11-3B-1 Robust Design - Signal to Noise Ratio (SNR)
3.12-3B-1 Failure Mode and Effects Analysis (FMEA) - Introduction
3.13-3B-1 Failure Mode and Effects Analysis (FMEA) - Part 1
3.14-3B-1 Failure Mode and Effects Analysis (FMEA) - Part 2
3.15-3B-1 Failure Mode and Effects Analysis (FMEA) - Part 3
3.16-3B-1 Quality Function Deployment (QFD)
3.17-3B-1 Design for X - Introduction
3.18-3B-1 Design for X - Part 1
3.19-3B-1 Design for X - Part 2
3.20-3B-1 Design for Six Sigma (DFSS)
3.21-3B-2 Design Review
3.22-ASQ CQE 2022 Updates - 3B - Critical to Quality (CTQ)
3.23-3C Technical Drawing and Specifications - Projections
3.24-3C Drawing - First Angle Projection Symbol
3.25-3C Drawing - First Angle Projection Example
3.26-3C Drawing - Third Angle Projection Symbol
3.27-3C Drawing - Third Angle Projection Example
3.28-3C Drawing - Title Block
3.29-3C Drawing - Line Types
3.30-3C Drawing - Dimensioning
3.31-3C Drawing - Tolerances
3.32-3C Geometric Dimensioning & Tolerancing (GD&T) - Intro
3.33-3C Geometric Dimensioning & Tolerancing (GD&T) - Part 1
3.34-3C Geometric Dimensioning & Tolerancing (GD&T) - Part 2
3.35-3C Geometric Dimensioning & Tolerancing (GD&T) - Part 3
3.36-ASQ CQE 2022 Updates - 3C and 3D - No Change
3.37-3D Verification and Validation
3.38-3E-1 Predictive and Preventive Maintenance
3.39-3E-2 Reliability and Maintainability Indices
3.40-3E-2 Measuring Reliability
3.41-3E-2 Mean Time to Failure - MTTF
3.42-3E-2 Mean Time Between Failures - MTBF
3.43-3E-2 Solved Questions - Mean Time Between Failures - MTBF
3.44-3E-2 Mean Time Between Failures - MTBF - Probability Distribution
3.45-3E-2 Mean Time to Repair - MTTR
3.46-3E-3 Reliability Models - Introduction
3.47-3E-3 Reliability Hazard Function
3.48-3E-3 Bathtub Curve
3.49-3E-3 Bathtub Curve - Distributions
3.50-3E-3 Back to Basics - Probability
3.51-Probability - Type of Events
3.52-3E-3 Probability - Addition Rule
3.53-3E-3 Probability - Multiplication Rule
3.54-3E-3 Reliability Example - Part 1
3.55-3E-3 Reliability Example - Part 2
3.56-3E-3 System Reliability Components in Series
3.57-3E-3 System Reliability Components in Parallel
3.58-3E-3 System Reliability Example
3.59-3E-3 Weibull Distribution
3.60-3E-3 Exponential Distribution
3.61-3E-3 Exponential Distribution Summary
3.62-3E-3 Exponential Distribution - Example 1
3.63-3E-3 Exponential Distribution - Example 2
3.64-3E-3 Exponential Distribution - Example 3
3.65-3E-4 Fault Tree Analysis
3.66-3E-4 Fault Tree Analysis - Example
3.67-ASQ CQE 2022 Updates - 3E - dFMEA, pFMEA and uFMEA
3.68-ASQ CQE 2022 Updates - 3E - Hazard Analysis
3.69-Section III - Download Slides
3.70-Section III Quiz - Product, Process, and Service Design
4-**** Section IV. Product and Process Control (25 Questions) ****
48
4.1-4 -Product and Process Control (25Questions)
4.2-4A Methods - Control Plan
4.3-4A Methods - Critical Control Point (CCP) Identification
4.4-4A Methods - Work Instructions and Validation
4.5-ASQ CQE 2022 Updates - 4A to 4C - No Change
4.6-4B-1 Material Identification, Status, and Traceability
4.7-4B-2 Material Segregation
4.8-4B-3 Material Classification
4.9-4B-4 Material Review Board (MRB)
4.10-4C Acceptance Sampling - Introduction
4.11-4C-1 Sample vs Population
4.12-4C-1 Sampling Errors
4.13-4C-1 Acceptance Sampling Standards ANSI Z1.4 and Z1.9, MIL-STD-104 and 414
4.14-4C-1 Acceptable Quality Limit (AQL)
4.15-4C-1 Rejectable Quality Limit (RQL)
4.16-4C-1 Operating Characteristic (OC) Curve Introduction
4.17-4C-1 Plotting an OC Curve - Part 1
4.18-4C-1 Plotting an OC Curve - Part 2
4.19-4C-1 Plotting an OC Curve - Part 3
4.20-4C-1 Average Outgoing Quality (AOQ)
4.21-4C-1 Average Outgoing Quality Limit (AOQL)
4.22-4C-1 Average Total Inspection (ATI)
4.23-4C-2 Sampling Standards
4.24-4C-2 Attribute Sampling
4.25-4C-2 Attribute Sampling - Two Examples
4.26-4C-2 Inspection Levels
4.27-4C-2 Reduced Normal and Tightened Inspection
4.28-4C-2 Single, Double, and Multiple Sampling
4.29-4C-2 Dodge Romig Sampling Plans
4.30-4C-2 Variable Sampling
4.31-4C-3 Sample Integrity
4.32-4D-1 Measurement Tools
4.33-4D -2 Destructive Tests
4.34-4D-2 Nondestructive Tests Part 1
4.35-4D-2 Nondestructive Tests Part 2
4.36-ASQ CQE 2022 Updates - 4D - Coordinate Measuring Machine (CMM)
4.37-4E Metrology
4.38-4F Measurement system analysis (MSA) - Introduction
4.39-4F - MSA - Accuracy - Bias, Linearity and Stability
4.40-4F - MSA - Precision - Repeatability and Reproducibility / PT Ratio
4.41-4F - Gage R&R - Three Methods - Introduction
4.42-4F - Gage R&R - Range Method
4.43-4F - Gage R&R - Average and Range Method
4.44-4F - Gage R&R - ANOVA Method
4.45-4F Number of Distinct Categories (NDC)
4.46-4F Crossed vs Nested Studies
4.47-Section IV - Download Slides
4.48-Section IV Quiz - Product and Process Control
5-**** Section V. Continuous Improvement (27 Questions) ****
44
5.1-5A Quality Control Tools - Introduction
5.2-5A QC Tools - 1. Checksheet
5.3-5A QC Tools - 2. Cause and Effects Analysis
5.4-5A QC Tools - 3. Histogram
5.5-5A QC Tools - 4. Pareto Chart
5.6-5A QC Tools - 5. Scatter Diagram
5.7-5A QC Tools - 6. Control Charts
5.8-5A QC Tools - 7. Stratification
5.9-5A QC Tools - Flow Chart (additional tool in ASQ CQE BoK)
5.10-ASQ CQE 2022 Updates - 5A to 5C - No Change
5.11-5B QM&P Tools - 1a. Affinity Diagram
5.12-5B QM&P Tools - 1b. Force Field Analysis
5.13-5B QM&P Tools - 2. Tree Diagram
5.14-5B QM&P Tools - 3. Process Decision Program Charts (PDPC)
5.15-5B QM&P Tools - 4. Matrix Diagram
5.16-5B QM&P Tools - 5. Interrelationship Digraphs
5.17-5B QM&P Tools - 6. Prioritization Matrix
5.18-5B QM&P Tools - 7. Activity Network Diagram
5.19-5C-1 Total Quality Management (TQM)
5.20-5C-2 Kaizen
5.21-5C-3 Plan-do-check-act (PDCA)
5.22-Six Sigma (5C-4)
5.23-5C-5 Theory of Constraints (TOC) - Introduction
5.24-5C-5 Theory of Constraints (TOC) - Five Steps
5.25-5C-5 Theory of Constraints (TOC) - Drum Buffer Rope
5.26-5D1 - 5S Workplace Improvement
5.27-5D2 - Value-stream Mapping (VSM)
5.28-5D3 - Kanban
5.29-5D4 Visual Control
5.30-5D5 Waste (Muda)
5.31-5D5 - Types of Muda - Part 1
5.32-5D5 - Types of Muda - Part 2
5.33-5D6 - Standardized Work
5.34-5D7 - Takt Time and other Process Matrics
5.35-5D8 - Single Minute Exchange of Die (SMED)
5.36-ASQ CQE 2022 Updates - 5D - Overall Equipment Effectiveness (OEE)
5.37-5E Corrective Action
5.38-5E Root Cause Analysis (RCA)
5.39-ASQ CQE 2022 Updates - 5E - Five Whys
5.40-5F Preventive Action
5.41-5F Poka-yoke for Preventive Action
5.42-5F Robust Design for Preventive Action
5.43-Section V - Download Slides
5.44-Section V Quiz - Continuous Improvement
6-**** Section VI. Quantitative Methods and Tools (36 Questions) ****
122
6.1-Welcome to Section 6
6.2-6A-1 Type of data
6.3-6A-2 Measurement scales
6.4-6A-3 Data Collection Methods
6.5-6A-3 Data Coding
6.6-6A-3 Missing Data
6.7-6A-4 Data accuracy and integrity
6.8-6A-5 Descriptive Statistics - Introduction
6.9-6A-5 Measurements of Central Tendency
6.10-6A-5 Measurements of Dispersion
6.11-6A-6 Stem-and-leaf Plot
6.12-6A-6 Box-and-Whisker Plot
6.13-6A-6 Scatter Plot
6.14-6A-7 Graphical Methods for Depicting Distributions
6.15-ASQ CQE 2022 Updates - 6A Data Automation
6.16-Section VI-A Quiz - Collecting and Summarizing Data
6.17-6B-1 Terminology - Type I and Type II Errors
6.18-6B-1 Hypothesis Testing Explained
6.19-6B-1 How to read the Z Table?
6.20-6B-1 Understanding the p Value
6.21-6B-1 Calculating Sample Size
6.22-6B-2 Drawing statistical conclusions
6.23-6B-3 Probability Terms and Concepts - Part 1
6.24-6B-3 Probability Terms and Concepts - Part 2
6.25-6B-3 Probability Terms and Concepts - Part 3
6.26-6B-3 Factorial, Permutations and Combinations
6.27-ASQ CQE 2022 Updates - 6B to 6H - No Change
6.28-Section VI-B Quiz - Quantitative Concepts
6.29-6C Normal Probability Distribution
6.30-6C Binomial Probability Distribution
6.31-6C Bernoulli and Hypergeometric Distribution
6.32-6C Poisson Distribution
6.33-Section VI-C Quiz - Probability Distributions
6.34-6D-1 Point Estimates and Confidence Intervals - Introduction
6.35-6D-1 Factors Affecting Confidence Interval Width
6.36-6D-1 Calculating Confidence Interval Using Z Table
6.37-6D-1 Calculating Confidence Interval Using t Table
6.38-6D-1 Calculating Confidence Interval for Proportions
6.39-6D-1 Variance Confidence Interval
6.40-6D-2 Hypothesis Testing - Introduction
6.41-6D-2 One Sample z Test
6.42-6D-2 One Sample t Test
6.43-6D-2 One Sample Proportions Test
6.44-6D-2 Two Sample z Test
6.45-6D-2 Two Sample t Test - Introduction
6.46-6D-2 Two Sample t Test - Example with Equal Variance
6.47-6D-2 Two Sample t Test - Example with Un-equal Variance
6.48-6D-3 Paired -comparision tests (Paired t Test)
6.49-6D-3 Two Sample p Test
6.50-6D-2 Tests for Variance
6.51-6D-2 F Test for Comparing Variances
6.52-6D-2 Chi-square Test for Variance
6.53-6D-5 Analysis of Variance (ANOVA) - Introduction
6.54-6D-5 ANOVA - Comparing Means Without Any Calculation
6.55-6D-5 ANOVA Formulas
6.56-6D-5 ANOVA Manual Calculations Example
6.57-6D-5 ANOVA Using Microsoft Excel
6.58-6D-5 ANOVA - Example (Expect something like this in the CQE exam)
6.59-6D-4 Goodness -of-fit tests
6.60-6D-6 Contingency Tables
6.61-6D-6 Contingency Tables (Practice Problem)
6.62-Section VI-D Quiz - Statistical Decision Making
6.63-6E Simple Linear Correlation - Introduction
6.64-6E Correlation Coefficient Manual Calculation
6.65-6E Correlation Coefficient - Calculating Using MS Excel
6.66-6E Correlation - Summary
6.67-6E Correlation vs Causation
6.68-6E Correlation - Confidence Interval
6.69-6E Linear Regression - Coefficient of Determination
6.70-6E Regression Equation - Manual Calculation
6.71-6E Residual Analysis
6.72-6E Time-series Analysis
6.73-Section VI-E Quiz - Relationship between Variable
6.74-6F-1 Statistical Process Control (SPC) Objectives and Benefits
6.75-6F-2 Common and Special Causes
6.76-6F-3 Selection of Variable
6.77-6F-4 Rational subgrouping
6.78-6F-5 Selecting Control Charts
6.79-6F-5 ImR or XmR Charts
6.80-6F-5 X bar R Charts
6.81-6F-5 X-bar s Charts
6.82-6F-5 Attribute Control Charts - Introduction
6.83-6F-5 nP Charts
6.84-6F5 P Charts
6.85-6F-5 C Charts
6.86-6F-5 U Charts
6.87-6F-6 Control Chart Analysis - Nelson Rules
6.88-6F-6 Nelson Rules - Calculating Probabilities
6.89-6F-7 Pre-control charts
6.90-6F-8 Short- run SPC - Part 1 - Introduction and Difference Chart
6.91-6F-8 Short- run SPC - Part 2 - Z-MR Chart
6.92-Section VI-F Quiz - Statistical Process Control (SPC)
6.93-6G Process Performance vs. Specifications
6.94-6G Process Capability Indices - Part 1
6.95-6G Process Capability Indices - Cr - Part 1A
6.96-6G Process Capability Indices - Part 2
6.97-6G Process Performance Indices
6.98-6G Conducting Process Capability Studies
6.99-Section VI-G Quiz - Process and Performance Capability
6.100-6H Design and Analysis of Experiments (DoE) Introduction
6.101-6H-1 Terminology - Factors and Response
6.102-6H-1 Terminology - An Example of Lauching Branded Coffee
6.103-6H-1 Terminology - Interaction Chart
6.104-6H-1 Terminology - Contour Plot
6.105-6H-1 Terminology - Mathematical Equation
6.106-6H-2 Planning and organizing experiments
6.107-6H-3 Introducing Interaction
6.108-6H-3 DOE Equation with Interaction
6.109-6H-3 Design of Experiments - Definitions
6.110-6H-3 Three Factors Experiment
6.111-6H-3 Half Factorial Design and Resolutions
6.112-6H-3 DOE Nuisance Factors and Balanced Design
6.113-6H-4 One-factor Experiments - Introduction
6.114-6H-4 One-factor Experiments - Completely Randomized Experiments
6.115-6H-4 One-factor Experiments -Randomized Block Design
6.116-6H-4 One-factor Experiments - Latin and Graeco Latin Square Design
6.117-6h-5 Full- factorial Experiments
6.118-6H-6 Two-level Fractional Factorial Experiments - Introduction
6.119-6H-6 Two-level Fractional Factorial Experiments - Number of Experiments
6.120-6H-6 Two-level Fractional Factorial Experiments - Plackett Burman Design
6.121-Section VI - Download Slides
6.122-Section VI-H Quiz - Design of Experiments
7-**** Section VII. Risk Management (15 Questions) ****
17
7.1-7A Risk Related Definitions
7.2-7A Planning for Risk Management
7.3-7A Identifying Risks
7.4-7B Risk Assessment
7.5-7C Risk Control - Introduction
7.6-7C Risk Control - Negative Risks
7.7-7C Risk Control - Positive Risks
7.8-7C Monitor and Control Risks
7.9-ASQ CQE 2022 Updates - 7-1 -Overview of changes to the BoK
7.10-ASQ CQE 2022 Updates - 7-2 Risk Based Thinking
7.11-ASQ CQE 2022 Updates - 7-3 - Types of Risk Management
7.12-ASQ CQE 2022 Updates - 7-4 -Risk Management Planning
7.13-ASQ CQE 2022 Updates - 7-5 -Risk Management Evaluation
7.14-ASQ CQE 2022 Updates - 7-6 -Risk Monitoring Techniques
7.15-ASQ CQE 2022 Updates - 7-7 - Mitigation Planning
7.16-Section VII - Download Slides
7.17-Section VII Quiz - Risk Management
8-Bonus Section
1
8.1-Bonus Lecture